電子發燒友App
|
Reference Design for a High-Current Power Supply with Lossless Current Sensing Using the MAX5060 abstract:?This reference design shows how to use a MAX5060 current-mode, step-down power-supply controller to implement lossless current sensing for high-current applications. In this design, the series resistance (DCR) of the inductor is used for current sensing to avoid power loss in the current-sense resistor. IntroductionToday's data processing elements demand higher currents from power supplies to achieve higher speed. Lossless current sensing and ground bouncing are key challenges for accurate control of output voltage and current in these applications.The MAX5060 PWM buck power-supply controller uses an average-current-mode control technique to track the load current, and it employs differential sensing to accurately control the output voltage. In this reference design, the series resistance (DCR) of the inductor is used for current sensing to avoid power loss in the current-sense resistor. This design shows a solution for implementing a high-current (30A) power supply with high system efficiency and good load regulation. The complete schematic, bill of materials (BOM), efficiency measurements, and test results are included below. Specifications and Design SetupThis reference design achieves the following specifications.Input Voltage: 12V ±10% Output Voltage: 1.5V Output Current: 30A Output Ripple: ±15mV Input Ripple: ±250mV Efficiency: > 88% with Half of Full Load (15A) Switching Frequency: 275kHz Footprint Size: 5cm × 3.3cm The schematic for this reference design is shown in Figure 1, and the BOM is given in Table 1. In this design, the MAX5060 is used in a buck configuration.  More detailed image (PDF, 100kB) Figure 1. Schematic of the MAX5060 buck converter for FSW = 275kHz. Table 1. Bill of Materials
Efficiency PlotsFigure 2 provides a plot of efficiency versus load current plots for this design, and Figure 3 presents load-regulation data. Figure 2. Load current versus converter efficiency for VIN = 12V.  Figure 3. Load current versus converter output voltage for VIN = 12V. Experimental ResultsConverter output voltage and load current are shown in Figures 4–7 for different input excitations. Figure 4. Converter waveforms with VIN = 12V and IOUT = 30A. VIN = 12V and IOUT = 2 × 15A Ch1: Output Current (2x) Ch2: Output Voltage Ch3: Input Voltage Ch4: High-Side MOSFET Gate Drive  Figure 5. Input and output ripple waveforms with VIN = 12V and IOUT = 30A. VIN = 12V and IOUT = 2 × 15A Ch2: Output Voltage Ripple Ch3: Input Voltage Ripple  Figure 6. Line transient response. VIN = 0 to 12V and IOUT = 2 × 15A Ch2: Output Voltage Ch3: Input Voltage  Figure 7. Load transient response. VIN = 12V and IOUT = 1A to 7A Ch1: Output Current Transient (1A to 7A) Ch2: Output Voltage Ripple The board developed for this application is shown in Figure 8. |
Reference Design for a High-Cu
- LO(39007)
- MAX5060(5937)
相關推薦
CU320-2PN RDY一直亮橙色指示燈是什么意思？怎么解決？
大家好，我有一個CU320-2PN 驅動系統帶了3個軸，在公司調試的時候是正常的，設備發到現場后發現 RDY一直常亮橙色指示燈，查閱資料顯示初始化固件，搞不懂什么意思，是需要升級固件嗎？謝謝各位大神1
2024-01-09 14:07:56
請問AD8302的Reference Input可以在A、B兩路輸入中任意選擇嗎？
本以為AD8302的Vmag輸出和兩路輸入信號的幅值對數比是一個簡單的正比例關系，但看數據手冊的圖表TPC1、2發現，以不同的輸入引腳作為reference input，Vmag相對幅值比的比例系數
2023-12-11 06:18:13
請教如何查看CU320卡里存貯的CU組態數據？
6SL3120-2TE15-0AA3 5A/5A Sinamics S120來驅動。CU320里面的SD卡的文件也能拿到。請問有什么辦法能知道電機的具體型號？
2023-11-17 07:09:31
100V同步降壓，內置mos，輸出電流5A-ZCC1005
? 400μA operating quiescent current
? 100V 400-mΩ high-side MOSFET
? Peak Current mode control
2023-11-09 15:48:40
讀取cu320變頻控制器參數時，如何填寫參數地址？
請問，通過上位機讀取cu320變頻控制器參數時，如何填寫參數地址？ 我們已經通過上位機實現讀取cu320數據功能，如讀取DB37.DBD1024。但我們不知道cu320中參數地址的映射關系，如我們想
2023-11-06 07:12:37
Cu-Clip互連技術有哪些特點呢？
Cu-Clip技術，它可以應用在很多模塊封裝形式當中。它的特點有：降低寄生電感和電阻，增加載流能力，相應地提高可靠性，以及靈活的形狀設計。
2023-10-07 18:18:28
809
809
車規模塊系列（四）：Cu-Clip互連技術簡析
在上篇討論TPAK封裝時，我們聊到了Cu-Clip技術，當然它可以應用在很多模塊封裝形式當中
2023-10-07 14:30:12786
786
3D Cu-Cu混合鍵合技術的優點和未來發展
先進半導體封裝的凸塊技術已取得顯著發展，以應對縮小接觸間距和傳統倒裝芯片焊接相關限制帶來的挑戰。該領域的一項突出進步是 3D Cu-Cu 混合鍵合技術，它提供了一種變革性的解決方案。
2023-09-21 15:42:29580
580一入雙出Pt100/Cu100熱電阻溫度信號隔離變送器
捷晟達科技(JSD科技)的JSD TARZ-1002系列是一入雙出Pt100/Cu100熱電阻溫度信號隔離變送器,是將輸入Pt100或(PT1000,PT10,Cu50,Cu100)的熱電阻信號
2023-09-16 01:50:08
0
0PT100和CU50溫度傳感器工作原理及特性
CU50溫度傳感器工作原理CU50溫度傳感器是一種電阻溫度傳感器，其工作原理基于材料電阻隨溫度的變化。CU50溫度傳感器采用銅和鎳等金屬材料制成，其中銅是主要的熱敏材料。傳感器的核心是一個細絲
2023-08-21 08:09:072816
2816
cu50溫度傳感器工作原理 pt100和cu50作為溫度傳感器的優缺點
選擇PT100還是CU50溫度傳感器取決于具體應用的需求和預算限制。對于較廣的溫度范圍和高精度要求，以及對成本要求較高的情況，PT100傳感器是一個理想的選擇。如果溫度范圍較窄且成本較為敏感，CU50傳感器可能更適合。同時，需要注意選取可靠的品牌和質量可控的傳感器以確保準確的溫度測量。
2023-08-17 15:21:192593
2593
High Speed IO用戶手冊
1 IР概述
High Speed l0 IP適用于PH1A(PH1A60、PH1A90、PH1A180、PH1A400）系列器件和PH1A100系列器件，它主要由時鐘緩沖、IOL以及延遲單元等原語
2023-08-09 07:43:37
8T49N281-003 數據表 Tilera Reference Design
8T49N281-003 數據表 Tilera Reference Design
2023-07-10 20:50:130
0Renesas YDBENETPMOD Technical Reference 手冊
Renesas YDBENETPMOD Technical Reference 手冊
2023-07-07 18:30:150
0CU4000?和CU4000 LoPro?銅箔Rogers
Rogers的CU4000?和CU4000?LoPro?電解銅箔能夠結合RO4000?層壓板設計生產加工多層板，適用于表層電源設計。 CU4000?銅箔是種經單層處理高性能電解銅箔，其機械粘接范圍
2023-07-05 13:57:00185
185500KHz, 16V, 3A，降壓DC-DC-LYF98103
1、Features
High Efficiency: Up to 96%
500KHz Frequency Operation
3A Output Current
No Schottky
2023-06-07 09:16:54
RT-Thread studio編譯出現undefined reference to警告怎么解決？
我希望使用lvgl里的demo，將demos文件添加構建，但是出現了undefined reference to xxx的錯誤，以及warning: implicit declaration
2023-04-04 14:25:28
8T49N281-003 數據表 Tilera Reference Design
8T49N281-003 數據表 Tilera Reference Design
2023-03-24 19:00:380
0求助，有LX2160a參考手冊嗎？
Manual或者QorIQ LX2160A Family Reference Manual ？而我在QorIQ LX2160A Reference Design Board Reference Manual
2023-03-24 08:17:05
工商網監
評論