多路溫度測控模塊在真空控制系統中的應用

為了遠程測量和控制多路設備溫度，采用一種積分電路精確測量PT100 熱電阻的阻值。同時采用AT89C51 單片機對所得數據進行非線形補償，并通過RS-485 總線接口，將所獲得數據傳送上位機，以便真空控制系統的聯網控制。由于本模塊對輸入量同時采用硬件和軟件的非線形補償，故具有精度高、可靠性較好、電路簡單、成本低、體積小、生產調試方便等特點。
關鍵字：二線制；溫度；熱電阻；熱電偶；積分電路；RS－485 總線
The application of the multi-channel temperature measure module In Vacuum Controlling System Guo Yuhui 1,2 ， YihaiLiang 1,2, Wang Yanyu 1 ， Qiao Weiming 1 （1 Institue of Modern Physics,Chinese Academy of Sciences,LanZhou,730000） （2 Graduate School of the Chinese Academy of Sciences ，Beijing,100039） Abstract: In order to measure and control some multi-channel temperature of device, I had designed an integral circuit base on PT100 and adopt AT89C51 controller to make data linear compensate. The module makes use of RS-485 series bus to carry out a vacuum remote-control system. The integral circuit adopts both hardware and software nonlinear compensation technology. Therefore, it has many advantages such as high accuracy, high reliability, small volume, simple circuit , low cost ,easy debugging and so on.
Keywords：Two wire; Temperature; Heat resistor; Thermocouple; integral circuit; RS-485 series bus