您好,歡迎來電子發燒友網! ,新用戶?[免費注冊]

您的位置:電子發燒友網>電子元器件>傳感器>

基于AWR1843的77-79GHz調頻連續波雷達傳感器解決方案

2019年04月05日 11:41 陳翠 作者: 用戶評論(0

TI公司的AWR1843是77-79GHz調頻連續波(FMCW)雷達傳感器,采用TI低功耗45nm RFCMOS工藝制造,具有非常高的集成度和非常小形狀系統,工作頻段76-81GHz.器件集成了DSP子系統,包含了用于雷達信號處理的高性能的C674x DSP.器件還包括BIST子系統,以進行無線電配置,控制和校準,以及基于用戶可編程ARM R4F的汽車接口。具有四個接收通路,三個發送通路,基于分?jǐn)?shù)N PLL的超精度啁啾引擎,TX功率12dBm,RX噪音(76-77GHz) 14dB,主要用在盲區檢測,變道輔助系統,路口交通警報,停車輔助系統,占用檢測以及簡單手勢識別和車門開啟器應用。本文介紹了AWR1843主要特性,框圖,處理器子系統框圖,參考電路圖以及評估模塊AWR1843BOOST主要特性和電路圖。

The AWR1843 device is an integrated single-chip FMCW radar sensor capable of operation in the 76- to81-GHz band. The device is built with TI’s low-power 45-nm RFCMOS process and enablesunprecedented levels of integration in an extremely small form factor. The AWR1843 is an ideal solutionfor low-power, self-monitored, ultra-accurate radar systems in the automotive space.

The AWR1843 device is a self-contained FMCW radar sensor single-chip solution that simplifies theimplementation of Automotive Radar sensors in the band of 76 to 81 GHz. It is built on TI’s low-power 45-nm RFCMOS process, which enables a monolithic implementation of a 3TX, 4RX system with built-in PLLand A2D converters. It integrates the DSP subsystem, which contains TI’s high-performance C674x DSPfor the Radar Signal processing. The device includes a BIST processor subsystem, which is responsible for radio configuration, control, and calibration. Additionally the device includes a user programmable ARMR4F based for automotive interfacing. The Hardware Accelerator block (HWA) can perform radarprocessing and can help save MIPS on the DSP for higher level algorithms. Simple programming modelchanges can enable a wide variety of sensor implementation (Short, Mid, Long) with the possibility ofdynamic reconfiguration for implementing a multimode sensor. Additionally, the device is provided as acomplete platform solution including reference hardware design, software drivers, sample configurations,API guide, and user documentation.

AWR1843主要特性:

? FMCW Transceiver

– Integrated PLL, Transmitter, Receiver,Baseband, and A2D

– 76- to 81-GHz Coverage With 4 GHz AvailableBandwidth

– Four Receive Channels

– Three Transmit Channels

– Ultra-Accurate Chirp Engine Based onFractional-N PLL

– TX Power: 12 dBm

– RX Noise Figure:

– 14 dB (76 to 77 GHz)

– 15 dB (77 to 81 GHz)

– Phase Noise at 1 MHz:

– –95 dBc/Hz (76 to 77 GHz)

– –93 dBc/Hz (77 to 81 GHz)

? Built-in Calibration and Self-Test (Monitoring)

– ARM? Cortex?-R4F-Based Radio ControlSystem

– Built-in Firmware (ROM

– Self-calibrating System Across Frequency andTemperature

? C674x DSP for FMCW Signal Processing

? On-Chip Memory: 2MB

? Cortex-R4F Microcontroller for Object Tracking andClassification, AUTOSAR, and Interface Control

– Supports Autonomous Mode (Loading UserApplication from QSPI Flash Memory)

? Integrated Peripherals

– Internal Memories With ECC

? Host Interface

– CAN (Two Instances, One Being CAN-FD)

? Other Interfaces Available to User Application

– Up to 6 ADC Channels

– Up to 2 SPI Channels

– Up to 2 UARTs

I2C

– GPIOs

– 2-Lane LVDS Interface for Raw ADC Data andDebug Instrumentation

? ASIL B Targeted

? AECQ100 Qualified

? AWR1843 Advanced Features

– Embedded Self-monitoring With No HostProcessor Involvement

– Complex Baseband Architecture

– Embedded Interference Detection Capability

– Programmable Phase Rotators in Transmit Pathto Enable Beam Forming

? Power Management

– Built-in LDO Network for Enhanced PSRR

– I/Os Support Dual Voltage 3.3 V/1.8 V

? Clock Source

– Supports External Oscillator at 40 MHz

– Supports Externally Driven Clock (Square/Sine)at 40 MHz

– Supports 40 MHz Crystal Connection with LoadCapacitors

? Easy Hardware Design

– 0.65-mm Pitch, 161-Pin 10.4 mm × 10.4 mmFlip Chip BGA Package for Easy Assembly andLow-Cost PCB Design

– Small Solution Size

? Supports Automotive Temperature OperatingRange

AWR1843應用:

? Blind Spot Detection

? Lane Change Assistance

? Cross Traffic Alert

? Parking Assistance

? Occupancy Detection

? Simple Gesture Recognition

? Car Door Opener Applications

圖1.AWR1843框圖

圖2.AWR1843汽車應用的自治雷達傳感器框圖

圖3.AWR1843處理器子系統框圖

圖4.AWR1843參考電路圖

圖5.AWR1843參考電路圖頂層走線圖

圖6.AWR1843參考電路圖頂層走線圖特寫鏡頭

圖7.AWR1843參考電路圖底層走線圖

評估模塊AWR1843BOOST

AWR1843 Evaluation Module (AWR1843BOOST) Single-Chip mmWave Sensing Solution The AWR1843 BoosterPack? from Texas Instruments? is an easy-to-use evaluation board for theAWR1843 mmWave sensing device, with direct connectivity to the microcontroller (MCU) LaunchPad?Development Kit. The BoosterPack contains everything required to start developing software for on-chipC67x DSP core and low-power Arm? R4F controllers, including onboard emulation for programming anddebugging as well as onboard buttons and LEDs for quick integration of a simple user interface.

The AWR1843 BoosterPack from Texas Instruments is an easy-to-use evaluation board for the AWR1843mmWave sensing device, with direct connectivity to the microcontroller (MCU) LaunchPad DevelopmentKit. The BoosterPack contains everything required to start developing software for on-chip C67x DSP coreand low-power ARM R4F controllers, including onboard emulation for programming and debugging as wellas onboard buttons and LEDs for quick integration of a simple user interface.

The standard 20-pin BoosterPack headers make the device compatible with a wide variety of TI MCULaunchPads and enables easy prototyping.

評估模塊AWR1843BOOST主要特性:

? Two 20-pin LaundPad connectors that leverages the ecosystem of the TI LaunchPad

? XDS110 based JTAG emulation with a serial port for onboard QSPI flash programming

? Back-channel UART through USB-to-PC for logging purposes

? Onboard antenna

? 60-pin, high-density (HD) connector for raw analog-to-digital converter (ADC) data over LVDS andtrace-data capability

? Onboard CAN-FD transceiver

? One button and two LEDs for basic user interface

? 5-V power jack to power the board

評估模塊AWR1843BOOST包括:

? AWR1843 evaluation board

? Mounting brackets, screws, and nuts to place the printed-circuit board (PCB) vertical

? Micro USB cable to connect to PC

圖8.評估模塊AWR1843BOOST外形圖(正面)

圖9.評估模塊AWR1843BOOST外形圖(背面)

圖10.評估模塊AWR1843BOOST框圖

圖11.評估模塊AWR1843BOOST電路圖(1)

圖12.評估模塊AWR1843BOOST電路圖(2)

圖13.評估模塊AWR1843BOOST電路圖(3)

圖14.評估模塊AWR1843BOOST電路圖(4)

圖15.評估模塊AWR1843BOOST電路圖(5)

圖16.評估模塊AWR1843BOOST電路圖(6)

圖17.評估模塊AWR1843BOOST電路圖(7)

圖18.評估模塊AWR1843BOOST電路圖(8)

圖19.評估模塊AWR1843BOOST電路圖(9)

圖20.評估模塊AWR1843BOOST電路圖(10)

圖21.評估模塊AWR1843BOOST電路圖(11)

圖22.評估模塊AWR1843BOOST電路圖(12)

圖23.評估模塊AWR1843BOOST電路圖(13)

圖24.評估模塊AWR1843BOOST電路圖(14)

圖25.評估模塊AWR1843BOOST電路圖(15)

圖26.評估模塊AWR1843BOOST電路圖(16)

圖27.評估模塊AWR1843BOOST電路圖(17)

圖28.評估模塊AWR1843BOOST PCB設計圖(1)

圖29.評估模塊AWR1843BOOST PCB設計圖(2)

詳情請見:

awr1843.pdf

非常好我支持^.^

(41) 51.3%

不好我反對

(39) 48.7%

( 發表人:陳翠 )

      發表評論

      用戶評論
      評價:好評中評差評

      發表評論,獲取積分! 請遵守相關規定!

      ?