電子發燒友App

硬聲App

搜索歷史

清空
搜索熱詞
      0
      • 聊天消息
      • 系統消息
      • 評論與回復
      VIP于 到期 續費
      登錄后你可以
      • 下載海量資料
      • 學習在線課程
      • 觀看技術視頻
      • 寫文章/發帖/加入社區
      會員中心
      創作中心
      發布
      創作活動

      完善資料讓更多小伙伴認識你，還能領取20積分哦，立即完善>

      3天內不再提示
      創作
      電子發燒友網>電子資料下載>類型>參考設計>A2B類D放大器模塊用戶指南

      A2B類D放大器模塊用戶指南

      2021-03-23 | pdf | 210.48KB | 次下載 | 2積分

      資料介紹

      This version (03 Mar 2020 18:47) was approved by Chad Wentworth.The Previously approved version (13 Feb 2020 18:46) is available.Diff

      Table of Contents

      A2B Class-D Amplifier Module for SHARC Audio Module

      The SHARC Audio Module A2B Class-D Amplifier Module is an A2B connected board that contains two Class-D SSM3582 amplifier ICs, providing 4 channels of audio output.

      The A2B Class-D Amplifier Module

      Block Diagram of the A2B Class-D Amplifier Module

      Schematics, PCB Layout, Bill of Materials

      SHARC Audio Module A2B Class-D Amplifier Module Design and Integration Files

      • Bill of Materials (Coming Soon)
      • Fabrication and Assembly Files (Coming Soon)

      Automotive Audio Bus (A2B) Interface Duraclick (P4, P5)

      The A2B bus uses crossover cables to connect nodes to each other. P4 connects to upstream towards the Master Node in the network and P5 connects downstream to the next slave in the network.

      The A2B Class-D Amplifier Module uses the AD2428W IC.

      SSM3582 Class-D Amplifier

      There are two ADI SSM3582 Class-D amplifiers on the A2B Class-D Amplifier Module. Each is two channels.

      At 16V, the max power per channel is ~24w of power.

      P11 AMP1 Left Channel Output

      1 Positive
      2 Negative

      P12 AMP1 Right Channel Output/MONO

      1 Positive
      2 Negative

      P13 AMP2 Left Channel Output

      1 Positive
      2 Negative

      P14 AMP2 Right Channel Output/MONO

      1 Positive
      2 Negative

      Populate JP6 & JP7 to configure AMP1 into MONO Output on P12. Populate JP8 & JP9 to configure AMP2 into MONO Output on P14.

      USBi Connector for SigmaStudio (P1)

      The USBi Connector on the SHARC Audio Module allows for the use of the USBi adapter for SigmaStudio and bare metal programming.

      +12v Input Power Jack (P3)

      The A2B Class-D Amplifier Module is designed to run off a 12v to 16v supply. A 12v 2A DC power supply is included in the kit. The barrel connector on the A2B Class-D Amplifier Module can handle up to 3A current.

      The Class-D Amplifier Module is shipped with a US power supply. Here is a universal option: https://www.digikey.com/products/en?keywords=102-3580-ND

      Power Supply Input (P10)

      P10 is a power supply input jack to connect up to 16v @ 8A MAX. There is an 8A fuse on the Positive input of the P10 connector.

      Pushbuttons (PB1, PB2)

      Two GPIO pushbuttons are provided on the A2B Class-D Amplifier Module. They are connected as follows:

      • PB1 is connected to IO1 on AD2428W
      • PB2 is connected to IO2 on AD2428W

      GPIO LEDs (LED1, LED2)

      There are two GPIO-controlled LEDs on the A2B Class-D Amplifier Module. They are connected as follows:

      • LED1 is connected to IO0 on the AD2428W
      • LED2 is connected to IO7 on the AD2428W

      PDM/TDM Connectors

      JP5 PDM MIC

      3.3v 12 GND
      DRX0 34 GND
      DRX1 56 GND
      BLCK 78 GND

      P2 Buffered TDM Signals

      B_DTX0 1 2 GND
      B_DTX1 3 4 GND
      B_DRX0 5 6 GND
      B_DRX1 7 8 GND
      B_FSYNC 9 10 GND
      B_BLCK 1112 GND

      P15 Unbuffered TDM Signals

      DTX0 12 GND
      DTX1 34 GND
      DRX0 56 GND
      DRX1 78 GND
      FSYNC 910 GND
      BLCK 1112 GND

      EEPROM

      The A2B Class-D Amplifier Module has a TWI 256k EEPROM for configuration data. The EEPROM used is the 24FC256I/MS.

      Navigation - SHARC Audio Module
      Prev.: Audio Project FinUp: Hardware ReferenceNext.: Faust and the SHARC Audio Module
      下載該資料的人也在下載 下載該資料的人還在閱讀
      更多 >

      評論

      查看更多

      下載排行

      本周

      1. 1電子電路原理第七版PDF電子教材免費下載
      2. 0.00 MB  |  1491次下載  |  免費
      3. 2單片機典型實例介紹
      4. 18.19 MB  |  95次下載  |  1 積分
      5. 3S7-200PLC編程實例詳細資料
      6. 1.17 MB  |  27次下載  |  1 積分
      7. 4筆記本電腦主板的元件識別和講解說明
      8. 4.28 MB  |  18次下載  |  4 積分
      9. 5開關電源原理及各功能電路詳解
      10. 0.38 MB  |  11次下載  |  免費
      11. 6100W短波放大電路圖
      12. 0.05 MB  |  4次下載  |  3 積分
      13. 7基于單片機和 SG3525的程控開關電源設計
      14. 0.23 MB  |  4次下載  |  免費
      15. 8基于AT89C2051/4051單片機編程器的實驗
      16. 0.11 MB  |  4次下載  |  免費

      本月

      1. 1OrCAD10.5下載OrCAD10.5中文版軟件
      2. 0.00 MB  |  234313次下載  |  免費
      3. 2PADS 9.0 2009最新版 -下載
      4. 0.00 MB  |  66304次下載  |  免費
      5. 3protel99下載protel99軟件下載(中文版)
      6. 0.00 MB  |  51209次下載  |  免費
      7. 4LabView 8.0 專業版下載 (3CD完整版)
      8. 0.00 MB  |  51043次下載  |  免費
      9. 5555集成電路應用800例(新編版)
      10. 0.00 MB  |  33562次下載  |  免費
      11. 6接口電路圖大全
      12. 未知  |  30320次下載  |  免費
      13. 7Multisim 10下載Multisim 10 中文版
      14. 0.00 MB  |  28588次下載  |  免費
      15. 8開關電源設計實例指南
      16. 未知  |  21539次下載  |  免費

      總榜

      1. 1matlab軟件下載入口
      2. 未知  |  935053次下載  |  免費
      3. 2protel99se軟件下載(可英文版轉中文版)
      4. 78.1 MB  |  537793次下載  |  免費
      5. 3MATLAB 7.1 下載 (含軟件介紹)
      6. 未知  |  420026次下載  |  免費
      7. 4OrCAD10.5下載OrCAD10.5中文版軟件
      8. 0.00 MB  |  234313次下載  |  免費
      9. 5Altium DXP2002下載入口
      10. 未知  |  233046次下載  |  免費
      11. 6電路仿真軟件multisim 10.0免費下載
      12. 340992  |  191183次下載  |  免費
      13. 7十天學會AVR單片機與C語言視頻教程 下載
      14. 158M  |  183277次下載  |  免費
      15. 8proe5.0野火版下載(中文版免費下載)
      16. 未知  |  138039次下載  |  免費