MAX8625/A pdf

The MAX8625A PWM step-up/down regulator is intend-
ed to power digital logic, hard disk drives, motors, and
other loads in portable, battery-powered devices such
as PDAs, cell phones, digital still cameras (DSCs), and
MP3 players. The MAX8625A provides either a fixed
3.3V or adjustable output voltage (1.25V to 4V) at up to
0.8A from a 2.5V to 5.5V input. The MAX8625A utilizes
a 2A peak current limit.
Maxim’s proprietary H-bridge topology* provides a
seamless transition through all operating modes without
the glitches commonly seen with other devices. Four
internal MOSFETs (two switches and two synchronous
rectifiers) with internal compensation minimize external
components. A SKIP input selects a low-noise, fixed-
frequency PWM mode, or a high-efficiency skip mode
where the converter automatically switches to PFM
mode under light loads for best light-load efficiency.
The internal oscillator operates at 1MHz to allow for a
small external inductor and capacitors.
The MAX8625A features current-limit circuitry that shuts
down the IC in the event of an output overload. In addi-
tion, soft-start circuitry reduces inrush current during
startup. The IC also features True ShutdownTM, which
disconnects the output from the input when the IC is
disabled. The MAX8625A is available in a 3mm x 3mm,
14-pin TDFN package.
Applications
PDAs and Smartphones
DSCs and Camcorders
MP3 Players and Cellular Phones
Battery-Powered Hard Disk Drive (HDD)