2.5V/3.3V，10位2端口電平轉換器總線開關ADG3246數據表

　　The ADG3246 is a 2.5 V or 3.3 V， 10-bit， 2-port digital switch. It is designed on Analog Devices? low voltage CMOS process， which provides low power dissipation yet gives high switching speed and very low on resistance， allowing inputs to be connected to outputs without additional propagation delay or generating additional ground bounce noise.

　　The switches are enabled by means of the bus enable （BE） input signal. These digital switches allow bidirectional signals to be switched when ON. In the OFF condition， signal levels up to the supplies are blocked.

　　This device is ideal for applications requiring level translation. When operated from a 3.3 V supply， level translation from 3.3 V inputs to 2.5 V outputs occurs. Similarly， if the device is oper-ated from a 2.5 V supply and 2.5 V inputs are applied， the device will translate the outputs to 1.8 V. In addition to this， the ADG3246 has a level translating select pin （SEL）。 When SEL is low， VCC is reduced internally， allowing for level translation between 3.3 V inputs and 1.8 V outputs. This makes the device suited to appli-cations requiring level translation between different supplies， such as converter to DSP/microcontroller interfacing.