單操作電壓串行閃存具有100兆赫雙輸出SPI總線接口IS25CD025

　　The IS25CD025 are 256Kbit Serial Peripheral Interface （SPI） Flash memories， providing single- or dual-output. The devices are designed to support a 33 MHz clock rate in normal read mode， and 100 MHz in fast read， the fastest in the industry. The devices use a single low voltage power supply， wide operating voltage ranging from 2.70 Volt to 3.60 Volt， to perform read， erase and program operations. The devices can be programmed in standard EPROM programmers. The IS25CD025 are accessed through a 4-wire SPI Interface consisting of Serial Data Input/Output （SlO）， Serial Data Output （SO）， Serial Clock （SCK）， and Chip Enable （CE#） pins. They comply with all recognized command codes and operations. The dual-output fast read operation provides and effective serial data rate of 200MHz. The devices support page program mode， where 1 to 256 bytes data can be programmed into the memory in one program operation. These devices are divided into uniform 4 KByte sectors or uniform 32 KByte blocks. The IS25CD025 are manufactured on pFLASH?’s advanced non-volatile technology. The devices are offered in 8-pin SOIC 150mil and 8-pin TSSOP. The devices operate at wide temperatures between -40°C to +105°C.