積極尋求更好的ORing解決方案

　　積極尋求更好的ORing解決方案

　　有源ORing提供顯著的好處在肖特基二極管的MOSFET，但它強加一些設計參數，工程師需要了解為了開發出最合適的解決方案

　　利用二極管主動組合多個或冗余電源是一項跨越半導體工業歷史的技術，因?yàn)槎O管是當今使用的最簡單和最有用的半導體之一。然而，由于正向偏置pn結的“撬棍”效應，它的簡單性也在這一類應用中失敗了。雖然現在有一系列不同的開關特性，選擇二極管，如功率肖特基二極管，基本功能是“開”或“關”，與一個半導體結的主要好處：控制。由于二極管pn結的基本物理特性，它們通過的電流越多，耗散的功率就越大。

　　用較先進的場效應晶體管取代不起眼的二極管降低了功耗，并引入了二極管無法控制的水平，但也有其后果。了解這些后果使半導體產業發展的一系列控制解決方案的拓?fù)浣Y(jié)構采用有源ORing MOSFET。

　　Active ORing is now commonplace in power supply design， but is most relevant in applications that must match the needs of delivering significant levels of power with a high degree of ruggedness and reliability. Today， that typically points towards telecommunications， but it is equally valid in other applications where load sharing/balancing between power supplies is implemented， or where so-called ‘N+1’ redundancy is required.

　　Conceptually， replacing diodes with MOSFETs is relatively straightforward and brings instant benefits in terms of reliability. The power dissipated by a diode when it is conducting is significant and proportional to the current passing through it， so in high power applications， the diodes tend to dissipate higher power. In turn， this demands the use of larger diodes and heat sinks， or other cooling solutions such as forced air or convection. Wherever cooling becomes necessary， it represents a potential point of failure. So， as the heat dissipated by diodes increases， so too does the risk of failure. It is widely accepted that despite the efforts to lower the active power consumption of integrated devices， the power demand trend of today‘s applications is only increasing， thereby demanding ever more powerful power supplies and， in turn， larger diodes with their associated heat dissipation issues.