LED標牌應用混合顏色、節能和復雜性

　　LED標牌應用混合顏色、節能和復雜性

　　標牌是最具挑戰性的LED應用之一。它包括一個大而多樣化的市場，包括單色信息標志（例如進出口標志）和簡單的信息標志；公共汽車和火車站的多色目的地標志；公共汽車和火車內顯示。RGB應用程序包括體育場館的大屏幕和小顯示屏，以及使用數千個LED驅動芯片的多媒體廣告牌。例如，靠近公路的一個大廣告牌大小的標志可以集成125000個或更多的設備。

　　標志的基本知識

　　大型LED標志由模塊組成，包括LED、驅動器、電源、控制單元、傳感器和某種源于LED測序數據的處理器。具有高刷新率的RGB標志顯示通常需要每個模塊上的MCU來實現色彩校正。對于在現場部署LED標志/顯示后，微控制器對于處理突發事件也是非常重要的。隨著時間的推移，LED改變顏色，有時會失敗。模塊也開始失敗。MCU存儲關于舊模塊的操作特性的信息。這允許對新模塊進行正確的顏色校準。圖1顯示了在體育場中可以找到的高端標志顯示屏的主要組成部分。

　　Figure 1： Large signage displays use hundreds of thousands of LED drivers （Courtesy of STMicroelectronics）。

　　The components of most interest in this article have the following primary characteristics：

　　The LEDs themselves typically have drive currents in the 8 to 10 mA range. The higher current devices are used for outdoor applications and different colors require different drive currents， which creates a design complication that will be discussed later.

　　The driver market is probably the most significant and – except for simple signage applications – 16-bit chips tend to predominate. They become progressively more expensive as special features such as error detection， gain control， PWM， the ability to identify LED failure， thermal shutdown and other features are added. Another important reason for 16-bit dominance is that many controllers output data in bytes.

　　Control units can be purchased but many design teams choose to create their own controller using an FPGA.