計劃你的同步降壓轉換器通過PMBus接口

　　計劃你的同步降壓轉換器通過PMBus接口

　　ASIC和FPGA的應用在現代數據中心的服務器和云計算系統需要高功率密度、高效率和快速的負載瞬態響應的負載點（POL）降壓直流/直流轉換器。輸出電壓和電流，隨著故障的條件下，這些高度集成的，快速響應的電壓轉換器模塊必須實時監測。同時，對于適當?shù)臒峁芾恚@些設備的外部溫度也必須實時監測。如果這些設計義務是不夠的，以確保工程師的工作日，所需的輸出電壓變化需要編程，以盡量減少功耗。

　　為了滿足這些需求，德克薩斯儀器增加了新的高電流，非隔離降壓直流/直流轉換器與PMBus（一種電源管理總線的縮寫）接口迅速的家庭。同時提供高達30的輸出電流和開關頻率高，PMBus兼容的轉換器，tps544b20和tps544c20使設計人員配置和監測其關鍵的設計參數，包括輸出電壓、電流和外部使用PMBus接口溫度。同樣，其中線性技術和Intersil，，也準備大電流，輸出變量，降壓PMBus兼容的數字直流/直流轉換器。

　　PMBus essentials

　　Traditionally， in the analog world， DC/DC converters are programmed using external resistors and capacitors. However， today’s digital technology allows a designer to configure， monitor and control a power supply using signals via an interface like PMBus. It is an open-standard digital-power-management protocol managed by the System Management Interface Forum （SMIF）， which is also credited with developing the SMBus and Smart Battery standards. The PMBus-command language enables communication between components of a power system. It comprises standard and device-specific commands. The specifications were first released in March 2005 and several revisions have been introduced since then.