MAX28200優勢特性以及基本應用電路

Maxim公司的MAX28200是低功耗16位MAXQ MCU（μC），包括了功能強大的16位RISC微控制器（MCU）以及10位93.75ksps ADC與I2C通信端口;還包括GPIO引腳。器件還集成了16KB閃存和2KB數據SRAM.此外實用的ROM空間包括宏命令如I2C引導加載程序，使得閃存固件能在現場升級。器件還提供NIST SP 800-185兼容的安全散列算法（SHA-3）KMAC挑戰和響應身份驗證，并能和其它SHA-3設備配對。工作電壓1.71V到3.63V，工作溫度-40℃ 到 +85℃，主要用在智能手機和消費類電子產品。本文介紹了MAX28200優勢和主要特性，應用框圖和基本應用電路，以及評估板MAX28200 EVK主要特性，電路圖，材料清單和PCB裝配布局圖。

The MAX28200 is a low-power， 16-bit MAXQ? microcontroller （μC） designed for low-power applications， including smart phones and consumer electronics. The device combines a powerful 16-bit RISC microcontroller with a 10-bit， 93.75ksps ADC along with an I2C communications port. The device includes four GPIO pins. The device includes 16KB of flash memory and 2KB of data SRAM. Additional utility ROM space includes macros such as an I2C bootloader to enable flash memory firmware updates in the field. The device provides NIST SP 800-185 compliant secure hash algorithm （SHA-3） KMAC challenge and response authentication and can be paired with other SHA-3 devices.

For the ultimate in low-power battery-operated performance， the device includes an ultra-low-power stop mode. In this mode， the minimum amount of circuitry is powered. The device wakes up on a matching I2C address. Wake-up sources also include external interrupts， the power-fail warning， and a wake-up timer interrupts. The microcontroller runs from a wide 1.71V to 3.63V operating voltage.

MAX28200優勢和主要特性：

High-Performance， Low-Power， 16-Bit RISC Core

Internal 12MHz Oscillator Requires No External Components

Two-Channel， 10-Bit 93.75ksps ADC

I2C Slave Peripheral 400kHz Operating Frequency

Flash Bootloader Function

Wakeup from Ultra-Low Power Stop Mode on I2C Address Match

16-Bit PWM Timer Output

Wake-Up Timer

SHA-3 KMAC Secure Authentication with RNG

1.71V to 3.63V Operating Voltage

16-Bit Instruction Word， 16-Bit Data Bus

Memory Features16KB Flash Memory

2KB Data SRAM

-40℃ to +85℃ Operating Temperature

Low Power Consumption0.2μA （typ）， 2.0μA （max） in Stop Mode， TA = +25℃， Power-Fail Monitor Disabled

2.7mA （typ） at 12MHz in Active Mode

1.7mm x 1.8mm x 0.5mm 12-Bump WLP Package

MAX28200應用：

Smartphones

Consumer Electronics

圖1.MAX28200應用框圖

圖2.MAX28200基本應用電路

評估板MAX28200 EVK

The MAX28200 evaluation kit （EV kit） provides a devel-opment platform that provides access to all the features of the MAX28200 in a tiny， easy to use board. The ROM-based bootloader is accessed through JTAG or an I2C interface. Connectors are provided for a host bus adapter， the DS9481P programming tool， and for JTAG. Board power can be supplied by USB， host bus adapter， JTAG， or the DS9481P programming tool. This board provides a powerful processing subsystem in a very small space that can be easily integrated into a variety of applications.

評估板MAX28200 EVK主要特性：

MAX28200 Microcontroller MAXQ20 16-Bit Core

16KB Flash Memory

2KB SRAM

PWM/Timer

2-Channel， 10-Bit ADC

I2C

Hardware SHA-3 Engine

Comparator

Integrated Peripherals Status LEDs

Temperature Sensor

Potentiometer

評估板MAX28200 EVK包括：

MAX28200 EV Kit Board with a Sample Device Preprogrammed with Demo

DS9481P-300# Programming Tool

USB Type A to Micro-B Cable

圖3.評估板MAX28200 EVK外形圖

圖4.評估板MAX28200 EVK電路圖（1）

圖5.評估板MAX28200 EVK電路圖（2）

圖6.評估板MAX28200 EVK電路圖（3）

評估板MAX28200 EVK材料清單：

圖7.評估板MAX28200 EVK PCB裝配布局圖