精品无码一区二区在线,91精品国产肉丝高跟在线,日韩欧美亚洲中字幕在线播放

實驗拓?fù)?/p>

配置R1

Router(config)




R1(config)
R1(config-if)
R1(config-if)




R1(config-if)
R1(config-if)
R1(config-if)




R1(config)
R1(config)

查看接口ip

R1
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                192.168.12.1    YES manual up                    up      
Ethernet0/1                192.168.1.254   YES manual up                    up      
Ethernet0/2                unassigned      YES unset  administratively down down    
Ethernet0/3                unassigned      YES unset  administratively down down    
Serial1/0                  unassigned      YES unset  administratively down down    
Serial1/1                  unassigned      YES unset  administratively down down    
Serial1/2                  unassigned      YES unset  administratively down down    
Serial1/3                  unassigned      YES unset  administratively down down

查看R1路由表

R1
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR


Gateway of last resort is not set


      192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.1.0/24 is directly connected, Ethernet0/1
L        192.168.1.254/32 is directly connected, Ethernet0/1
S     192.168.3.0/24 [1/0] via 192.168.12.2
      192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.12.0/24 is directly connected, Ethernet0/0
L        192.168.12.1/32 is directly connected, Ethernet0/0
S     192.168.23.0/24 [1/0] via 192.168.12.2

配置R2

Router>enable
Router
Router(config)




R2(config)
R2(config-if)
R2(config-if)




R2(config-if)
R2(config-if)
R2(config-if)




R2(config)
R2(config)

查看接口ip

R2
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                192.168.12.2    YES manual up                    up      
Ethernet0/1                192.168.23.2    YES manual up                    up      
Ethernet0/2                unassigned      YES unset  administratively down down    
Ethernet0/3                unassigned      YES unset  administratively down down    
Serial1/0                  unassigned      YES unset  administratively down down    
Serial1/1                  unassigned      YES unset  administratively down down    
Serial1/2                  unassigned      YES unset  administratively down down    
Serial1/3                  unassigned      YES unset  administratively down down

查看路由

R2
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR


Gateway of last resort is not set


S     192.168.1.0/24 [1/0] via 192.168.12.1
S     192.168.3.0/24 [1/0] via 192.168.23.3
      192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.12.0/24 is directly connected, Ethernet0/0
L        192.168.12.2/32 is directly connected, Ethernet0/0
      192.168.23.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.23.0/24 is directly connected, Ethernet0/1
L        192.168.23.2/32 is directly connected, Ethernet0/1

配置R3

Router>enable 
Router
Router(config)
R3(config)


R3(config)
R3(config-if)
R3(config-if)


R3(config-if)
R3(config-if)
R3(config-if)


R3(config)
R3(config)

查看接口ip

R3
Interface                  IP-Address      OK? Method Status                Protocol
Ethernet0/0                192.168.23.3    YES manual up                    up      
Ethernet0/1                192.168.3.254   YES manual up                    up      
Ethernet0/2                unassigned      YES unset  administratively down down    
Ethernet0/3                unassigned      YES unset  administratively down down    
Serial1/0                  unassigned      YES unset  administratively down down    
Serial1/1                  unassigned      YES unset  administratively down down    
Serial1/2                  unassigned      YES unset  administratively down down    
Serial1/3                  unassigned      YES unset  administratively down down

查看路由

R3
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR


Gateway of last resort is not set


S     192.168.1.0/24 [1/0] via 192.168.23.2
      192.168.3.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.3.0/24 is directly connected, Ethernet0/1
L        192.168.3.254/32 is directly connected, Ethernet0/1
S     192.168.12.0/24 [1/0] via 192.168.23.2
      192.168.23.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.23.0/24 is directly connected, Ethernet0/0
L        192.168.23.3/32 is directly connected, Ethernet0/0

配置vpc4

VPCS> ip 192.168.1.2/24 192.168.1.254
Checking for duplicate address...
VPCS : 192.168.1.2 255.255.255.0 gateway 192.168.1.254

配置vpc5

VPCS> ip 192.168.3.2/24 192.168.3.254
Checking for duplicate address...
VPCS : 192.168.3.2 255.255.255.0 gateway 192.168.3.254

在vpc4上ping vpc5測試連通性

VPCS> ping 192.168.3.2


84 bytes from 192.168.3.2 icmp_seq=1 ttl=61 time=0.958 ms
84 bytes from 192.168.3.2 icmp_seq=2 ttl=61 time=0.785 ms
84 bytes from 192.168.3.2 icmp_seq=3 ttl=61 time=1.050 ms
84 bytes from 192.168.3.2 icmp_seq=4 ttl=61 time=0.823 ms
84 bytes from 192.168.3.2 icmp_seq=5 ttl=61 time=0.827 ms

審核編輯：湯梓紅

聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。舉報投訴

接口

接口

+關注

關注
33

文章
8596

瀏覽量
151145
CISCO

CISCO

+關注

關注
1

文章
65

瀏覽量
24668
靜態路由

靜態路由

+關注

關注
0

文章
18

瀏覽量
8569

原文標題：Cisco配置靜態路由

文章出處：【微信號：magedu-Linux，微信公眾號：馬哥Linux運維】歡迎添加關注！文章轉載請注明出處。

評論

相關推薦

Cisco路由器網絡設計

Cisco路由器網絡設計相關知識，拓展網絡知識。

發表于 06-04 19:42 ?29次下載

CISCO路由器配置實例

Cisco 路由器的基本配置百余例目錄1.用戶通過DDN專線接入ISP 2.遠程用戶撥號連入局域網 3.遠程用戶間對撥 4.Cisco

發表于 08-31 09:46 ?46次下載

Cisco路由安全性分析和改進

路由器安全在網絡安全領域占有非常重要的地位，針對互聯網中使用最為廣泛的Cisco路由器，從3個方面出發分別說明了Cisco路由器所面臨的各種

發表于 11-24 18:41 ?15次下載

靜態路由協議配置

實驗十、靜態路由協議配置一、實驗原理1.1 路由協議路由器依據路由表進行轉發。

發表于 09-24 13:48 ?4761次閱讀

<b class='flag-5'>靜態</b><b class='flag-5'>路由</b>協議<b class='flag-5'>配置</b>

配置靜態路由

配置靜態路由用戶可以在全局配置模式下通過命令 ip route

發表于 06-09 23:51 ?903次閱讀

<b class='flag-5'>配置</b><b class='flag-5'>靜態</b><b class='flag-5'>路由</b>

靜態路由配置舉例

靜態路由配置舉例在這個例子中使用 IP ROUTE 命令來配置靜態路由：ip route

發表于 06-09 23:52 ?1212次閱讀

<b class='flag-5'>靜態</b><b class='flag-5'>路由</b><b class='flag-5'>配置</b>舉例

CISCO系列路由器密碼恢復匯總

CISCO系列路由器密碼恢復匯總　密碼恢復原理(1)Cisco路由器保存了幾種不同的配置參數,并存放在不

發表于 01-13 13:03 ?957次閱讀

CISCO路由器初始配置手冊

CISCO路由器初始配置手冊 很多初學路由器知識的網友對路由器的初始配置可能感到很陌生,本人在

發表于 04-01 11:49 ?838次閱讀

CISCO路由器之廣域網協議設置

CISCO路由器之廣域網協議設置一、HDLC HDLC是CISCO路由器使用的缺省協議，一臺新路由器在未指定封裝協議時默認使用H

發表于 04-01 13:42 ?3413次閱讀

CISCO與華為3COM路由器的比較分析

剖析CISCO與華為3COM路由器的區別，熟練掌握下面涉及到的CISCO與華為3COM路由器知識，很多方法都會使你豁然開朗的。華為路由器與同

發表于 02-26 10:22 ?1236次閱讀

靜態路由和缺省路由知識

一、實驗?zāi)康?本實驗主要用來練習靜態路由、缺省路與配置，驗證靜態路由、缺省路由的工作原理，實驗的

發表于 03-12 16:59 ?28次下載

思科路由器配置基礎_7個方面詳解cisco路由器配置

大家一定對Cisco路由器并不陌生，作為第一個入行的國際化企業而言，它的產品眾所周知，但也正因?yàn)槿绱俗尨蠹覍?duì)于一些有關它的配置有所困惑，本文主要介紹的是思科路由器

發表于 05-14 09:32 ?1.7w次閱讀

詳解交換機與路由器的配置，如何配置靜態路由

一種路由的方式，路由項由手動配置，而非動態決定。與動態路由不同，靜態路由是固定的，不會改變，即使

發表于 01-03 10:19 ?3155次閱讀

Cisco路由器調試命令大全

在配置Cisco路由器時，全局和接口命令的界限是十分明顯的。在這種情況下，我們使用“全局”來標識那些不能用于接口調試或者特定的傳輸介質類型和協議調試的命令。

發表于 02-19 11:40 ?1630次閱讀

靜態路由是什么？靜態路由如何配置？

靜態路由是一種路由的方式，路由項由手動配置，而非動態決定。與動態路由不同，

發表于 10-07 10:48 ?2.4w次閱讀

搜索歷史

Cisco配置靜態路由

評論