采用STM32開發板制作俄羅斯方塊小游戲
《俄羅斯方塊》（Tetris， 俄文：Тетрис）是一款由俄羅斯人阿列克謝·帕基特諾夫于1984年6月發明的休閑游戲。
該游戲曾經被多家公司代理過。經過多輪訴訟后，該游戲的代理權最終被任天堂獲得。 [1] 任天堂對于俄羅斯方塊來說意義重大，因為將它與GB搭配在一起后，獲得了巨大的成功。
《俄羅斯方塊》的基本規則是移動、旋轉和擺放游戲自動輸出的各種方塊，使之排列成完整的一行或多行并且消除得分。
1.硬件平臺
STM32開發板
3.5寸LCD屏(16位并口8080時序)
字庫存儲W25Q64(SPI)
4個按鍵
2.方塊示例
本設計中方塊種類共5種，根據方向的不同可分為19種可能性。
3.游戲效果圖
1.游戲結束效果。當方塊堆疊觸碰到上頂端，則游戲結束。
2.正常游戲和方塊顏色分配，下一個方塊提示，積分統計，按鍵操作說明。
3.消行效果展示，得分獲取。
軟件設計中，消除一行得1分，消除兩行得2分，消除3行得4分，消除4行得8分。
4.軟件設計
1.單個方塊繪制和清除一行處理
/*************繪制單個方塊**************/
void Lcd_DrawDiamond(u16 x,u16 y,u16 c)
{
u16 i;
LcdWriteReg(0x2A);//設置x坐標
LcdWriteData((x>>8)&0xff);//x坐標高8位
LcdWriteData(x&0xff);//x坐標低8位
LcdWriteData(((x+8)>>8)&0xff);//x坐標高8位
LcdWriteData((x+8)&0xff);//x坐標低8位
LcdWriteReg(0x2B);//設置Y坐標
LcdWriteData((y>>8)&0xff);//Y坐標高8位
LcdWriteData(y&0xff);//Y坐標低8位
LcdWriteData(((y+8)>>8)&0xff);//Y坐標高8位
LcdWriteData((y+8)&0xff);//Y坐標低8位
LcdWriteReg(0x2C);//設置x坐標
for(i=0;i<9*9;i++)LcdWriteData(c);
}
/******************消除一行*******************/
void Lcd_ClearOneLineDisplay(u16 y,u16 c)
{
u16 i=0;
for(i=2;i;i+=10)>
2.繪制各個方塊，設置方塊顏色
/*每一個種類的顏色*/
/*
1 -- DARKBLUE --Drawshape_color[0]
2,3 -- BRRED --Drawshape_color[1]
4,5,6,7 -- BLUE --Drawshape_color[2]
8,9,10,11,12,13,14,15 -- GRAY --Drawshape_color[3]
16,17,18,19 --BLACK -- Drawshape_color[4]
*/
const u16 Drawshape_color[]={DARKBLUE,BRRED,BLUE,GRAY,BLACK};
/*******************繪制一個俄羅斯方塊***************************
**形參：x,y -- 要顯示的位置
** what --要繪制的方塊序號(1~19)
** c --方塊顏色
** stat --更新到二維數組中的狀態(0表示清除，1表示寫入狀態)
*******************************************************************/
void Lcd_Drawshape(u16 x,u16 y,u8 what,u16 c,u8 stat)
{
switch (what)
{
case 1:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
}
break;
case 2:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_DrawDiamond(x+30,y,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+20,y,stat);
Lcd_Refreshbuff(x+30,y,stat);
}
break;
case 3:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_DrawDiamond(x,y+30,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x,y+20,stat);
Lcd_Refreshbuff(x,y+30,stat);
}
break;
case 4:
{
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+20,y+10,c);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+20,y+10,stat);
}
break;
case 5:
{
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x,y+20,stat);
}
break;
case 6:
{
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+10,y+20,c);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+10,y+20,stat);
}
break;
case 7:
{
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+20,y,stat);
}
break;
case 8:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_DrawDiamond(x+10,y+20,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x,y+20,stat);
Lcd_Refreshbuff(x+10,y+20,stat);
}
break;
case 9:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+20,y,stat);
}
break;
case 10:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+10,y+20,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+10,y+20,stat);
}
break;
case 11:
{
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+20,y+10,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+20,y+10,stat);
Lcd_Refreshbuff(x+20,y,stat);
}
break;
case 12:
{
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+10,y+20,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+10,y+20,stat);
Lcd_Refreshbuff(x,y+20,stat);
}
break;
case 13:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_DrawDiamond(x+20,y+10,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+20,y,stat);
Lcd_Refreshbuff(x+20,y+10,stat);
}
break;
case 14:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x,y+20,stat);
}
break;
case 15:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+20,y+10,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+20,y+10,stat);
}
break;
case 16:
{
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x,y+20,c);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x,y+20,stat);
}
break;
case 17:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+20,y+10,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+20,y+10,stat);
}
break;
case 18:
{
Lcd_DrawDiamond(x,y,c);
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+10,y+20,c);
Lcd_Refreshbuff(x,y,stat);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+10,y+20,stat);
}
break;
case 19:
{
Lcd_DrawDiamond(x,y+10,c);
Lcd_DrawDiamond(x+10,y+10,c);
Lcd_DrawDiamond(x+10,y,c);
Lcd_DrawDiamond(x+20,y,c);
Lcd_Refreshbuff(x,y+10,stat);
Lcd_Refreshbuff(x+10,y+10,stat);
Lcd_Refreshbuff(x+10,y,stat);
Lcd_Refreshbuff(x+20,y,stat);
}
break;
}
}
3.方塊移動和方向切換
/******************向下移動*****************/
int Lcd_DownMove(u16 x,u16 y,u16 what,u16 c)
{
Lcd_Drawshape(x,y,what,WHITE,0);
Lcd_Drawshape(x,y+10,what,c,1);
return y+10;
}
/***************向左移動*********************/
int Lcd_LeftMove(u16 x,u16 y,u16 what,u16 c)
{
Lcd_Drawshape(x,y,what,WHITE,0);
Lcd_Drawshape(x-10,y,what,c,1);
return x-10;
}
/****************向右移動********************/
int Lcd_RightMove(u16 x,u16 y,u16 what,u16 c)
{
Lcd_Drawshape(x,y,what,WHITE,0);
Lcd_Drawshape(x+10,y,what,c,1);
return x+10;
}
/**************************改變圖形***************/
u8 Lcd_Changshape(u16 x,u16 y,u16 what,u16 c)
{
u8 stat;
switch(what)
{
case 1:stat=1;break;
case 2:
{
if(shape_place_stat[(y+40)/10][x/10] || shape_place_stat[(y+30)/10][x/10] || shape_place_stat[(y+20)/10][x/10] || shape_place_stat[(y+10)/10][x/10])
{
stat=2;
break;
}
Lcd_Drawshape(x,y,2,WHITE,0);Lcd_Drawshape(x,y,3,c,1);stat=3;break;
}
case 3:
{
if(shape_place_stat[(y+40)/10][(x+40)/10])
{
stat=3;
break;
}
Lcd_Drawshape(x,y,3,WHITE,0);Lcd_Drawshape(x,y,2,c,1);stat=2;break;
}
case 4:
{
Lcd_Drawshape(x,y,4,WHITE,0);Lcd_Drawshape(x,y,5,c,1);stat=5;break;
}
case 5:
{
Lcd_Drawshape(x,y,5,WHITE,0);Lcd_Drawshape(x,y,6,c,1);stat=6;break;
}
case 6:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=6;
break;
}
Lcd_Drawshape(x,y,6,WHITE,0);Lcd_Drawshape(x,y,7,c,1);stat=7;break;
}
case 7:Lcd_Drawshape(x,y,7,WHITE,0);Lcd_Drawshape(x,y,4,c,1);stat=4;break;
case 8:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=8;
break;
}
Lcd_Drawshape(x,y,8,WHITE,0);Lcd_Drawshape(x,y,9,c,1);stat=9;break;
}
case 9:
{
if(shape_place_stat[(y+30)/10][x/10])
{
stat=9;
break;
}
Lcd_Drawshape(x,y,9,WHITE,0);Lcd_Drawshape(x,y,10,c,1);stat=10;break;
}
case 10:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=10;
break;
}
Lcd_Drawshape(x,y,10,WHITE,0);Lcd_Drawshape(x,y,11,c,1);stat=11;break;
}
case 11:
{
if(shape_place_stat[(y+30)/10][x/10])
{
stat=11;
break;
}
Lcd_Drawshape(x,y,11,WHITE,0);Lcd_Drawshape(x,y,8,c,1);stat=8;break;
}
case 12:
{
if(shape_place_stat[(y)/10][(x+30)/10] || shape_place_stat[(y+20)/10][x/10] || shape_place_stat[(y+20)/10][(x+30)/10])
{
stat=12;
break;
}
Lcd_Drawshape(x,y,12,WHITE,0);Lcd_Drawshape(x,y,13,c,1);stat=13;break;
}
case 13:
{
if(shape_place_stat[(y+30)/10][x/10])
{
stat=13;
break;
}
Lcd_Drawshape(x,y,13,WHITE,0);Lcd_Drawshape(x,y,14,c,1);stat=14;break;
}
case 14:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=14;
break;
}
Lcd_Drawshape(x,y,14,WHITE,0);Lcd_Drawshape(x,y,15,c,1);stat=15;break;
}
case 15:
{
if(shape_place_stat[(y+30)/10][x/10])
{
stat=15;
break;
}
Lcd_Drawshape(x,y,15,WHITE,0);Lcd_Drawshape(x,y,12,c,1);stat=12;break;
}
case 16:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=16;
break;
}
Lcd_Drawshape(x,y,16,WHITE,0);Lcd_Drawshape(x,y,17,c,1);stat=17;break;
}
case 17:
{
Lcd_Drawshape(x,y,17,WHITE,0);Lcd_Drawshape(x,y,16,c,1);stat=16;break;
}
case 18:
{
if(shape_place_stat[y/10][(x+30)/10])
{
stat=18;
break;
}
Lcd_Drawshape(x,y,18,WHITE,0);Lcd_Drawshape(x,y,19,c,1);stat=19;break;
}
case 19:
{
Lcd_Drawshape(x,y,19,WHITE,0);Lcd_Drawshape(x,y,18,c,1);stat=18;break;
}
}
return stat;
}
4.判斷得分，消行。
/***********得分判斷*********************/
u8 Lcd_GetMark(u8 *buff)
{
int i,j,k;
u8 cnt=0;//保存要消除的行數
int line=0;
/*判斷當前最高位置*/
for(i=47;i>=0;i--)//高度
{
for(j=1;j<23;j++)//每一行的方格數
{
if(shape_place_stat[i][j])break;
}
if(j==23)
{
line=i;//記錄當前方塊有多少行
break;
}
}
// printf("line=%d\r\n",line);
if(line<=1)return 0xff;//游戲結束
for(i=47;i>line;i--)
{
for(j=0;j<24;j++)
{
if(shape_place_stat[i][j]==0)break;
}
if(j==24)buff[cnt++]=i;//記錄哪一行需要消除
}
/*得分,消行*/
if(cnt)
{
for(i=0;i=0;k--)
{
for(j=buff[k];j>=line;j--)
{
for(i=0;i<24;i++)
{
shape_place_stat[j][i]=shape_place_stat[j-1][i];
}
}
line--;
}
for(i=buff[0];i>=line;i--)
{
Lcd_ClearOneLine(i);
}
}
if(cnt==0)cnt=0;
else if(cnt==1)cnt=1;//消除1行得1分
else if(cnt==2)cnt=4;//消除2行得4分
else if(cnt==3)cnt=8;
else if(cnt==4)cnt=16;
return cnt;
}
/*清空圖形掉落位置狀態信息*/
void Lcd_Clearshape(void)
{
int i,j;
for(i=0;i<48;i++)
{
for(j=1;j<23;j++)
{
shape_place_stat[i][j]=0;
}
}
}
;i++)>
5.窗口設計
/*******************************繪制顯示窗口**************************/
void Lcd_TetrisShowWind(void)
{
LCD_DrawLine(LCD_WIDTH-97, 0, LCD_WIDTH-97, LCD_HIGHT,BLACK);//畫直線
LCD_DrawLine(LCD_WIDTH-96, 0, LCD_WIDTH-96, LCD_HIGHT,BLACK);//畫直線
LCD_DrawLine(LCD_WIDTH-96, 170, LCD_WIDTH-1, 170,BLACK);
LCD_DrawLine(LCD_WIDTH-96, 171, LCD_WIDTH-1, 171,BLACK);
LCD_Display_Str(LCD_WIDTH-96+25,30,24,(u8 *)"NEXT",DARKBLUE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+25,200,16,(u8 *)"得 分",DARKBLUE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+96/2-12,200+30,24,(u8 *)"0",RED);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+10,320,16,(u8 *)"旋轉 KEYUP ",DARKBLUE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+10,360,16,(u8 *)"暫停 KEY1",DARKBLUE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+10,400,16,(u8 *)"左 KEY2 ",DARKBLUE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-96+10,440,16,(u8 *)"右 KEY0",DARKBLUE);//顯示字符串
}
6.初始化硬件，開始游戲
#include "stm32f10x.h"
#include "beep.h"
#include "led.h"
#include "key.h"
#include "delay.h"
#include "usart.h"
#include "w25q64.h"
#include "timer.h"
#include
#include "nt35310.h"
#include "tetris_game.h"
#include
int main()
{
u8 buff[49];
u8 stat=1;
int x0=112,y0=0;
u16 cnt=1,cnt2=0;
u8 key;
u16 mark=0,res,mark2=0;
u16 color;//方塊顏色
u16 i=200;
Beep_Init();
Led_Init();
Key_Init();//按鍵初始化
TIMx_Init(TIM4,7200,65535);
Usartx_Init(USART1,115200,72);
printf("串口初始化完成\r\n");
W25Q64_Init();
LCD_Init();
AA:
LCD_Clear(WHITE);//清屏函數
Lcd_TetrisShowWind();
cnt=rand()%20;
if(cnt==0)cnt=1;
cnt2=rand()%20;
if(cnt2==0)cnt2=1;
Lcd_Drawshape(LCD_WIDTH-96+35,80,cnt2,BLACK,0);
/*俄羅斯方塊示例圖*/
// for(i=1;i<=19;i++)
// {
// if(i==1)color=Drawshape_color[0];
// else if(i>=2 && i<=3)color=Drawshape_color[1];
// else if(i>=4 && i<=7)color=Drawshape_color[2];
// else if(i>=8 && i<=15)color=Drawshape_color[3];
// else if(i>=16 && i<=19)color=Drawshape_color[4];
// Lcd_Drawshape(x0,y0,i,color,0);//繪制圖形
// x0+=50;
// if(x0>=260)
// {
// x0=50;
// y0+=50;
// }
// }
while(1)
{
key=Key_Getval();
if(key==3)//暫停
{
stat=!stat;
}
else if((key==1) && stat)//切換方向
{
i=0;
if(cnt==1)color=Drawshape_color[0];
else if(cnt>=2 && cnt<=3)color=Drawshape_color[1];
else if(cnt>=4 && cnt<=7)color=Drawshape_color[2];
else if(cnt>=8 && cnt<=15)color=Drawshape_color[3];
else if(cnt>=16 && cnt<=19)color=Drawshape_color[4];
cnt=Lcd_Changshape(x0,y0,cnt,color);
}
else if((key==2) && stat)//右
{
if(Lcd_Shape_GetStat(x0+shape_widht[cnt-1]*10,y0)==0)
{
if(cnt==1)color=Drawshape_color[0];
else if(cnt>=2 && cnt<=3)color=Drawshape_color[1];
else if(cnt>=4 && cnt<=7)color=Drawshape_color[2];
else if(cnt>=8 && cnt<=15)color=Drawshape_color[3];
else if(cnt>=16 && cnt<=19)color=Drawshape_color[4];
x0=Lcd_RightMove(x0,y0,cnt,color);
}
}
else if((key==4) && stat)//左
{
if(x0>=10)
{
if(Lcd_Shape_GetStat(x0-10,y0)==0)
{
if(cnt==1)color=Drawshape_color[0];
else if(cnt>=2 && cnt<=3)color=Drawshape_color[1];
else if(cnt>=4 && cnt<=7)color=Drawshape_color[2];
else if(cnt>=8 && cnt<=15)color=Drawshape_color[3];
else if(cnt>=16 && cnt<=19)color=Drawshape_color[4];
x0=Lcd_LeftMove(x0,y0,cnt,color);
}
}
}
if(i>=100 && stat)
{
i=0;
if(cnt==1)color=Drawshape_color[0];
else if(cnt>=2 && cnt<=3)color=Drawshape_color[1];
else if(cnt>=4 && cnt<=7)color=Drawshape_color[2];
else if(cnt>=8 && cnt<=15)color=Drawshape_color[3];
else if(cnt>=16 && cnt<=19)color=Drawshape_color[4];
y0=Lcd_DownMove(x0,y0,cnt,color);//向下
if(Lcd_Shape_GetLowerBoundary(x0,y0,cnt))//
{
res=Lcd_GetMark(buff);
if(res==0xff)
{
mark=0;
res=0;
LCD_Display_Str(LCD_WIDTH/2-9*12,230,24,(u8 *)"GAME OVER",RED);
LCD_Display_Str(LCD_WIDTH/2-9*12-20,265,16,(u8 *)"請按任意鍵重新開始!",RED);
while(1)
{
key=Key_Getval();
if(key)
{
Lcd_Clearshape();
goto AA;
}
}
}
mark+=res;
if(mark2!=mark)
{
mark2=mark;
snprintf((char *)buff,sizeof(buff),"%02d",mark2);
LCD_Display_Str(LCD_WIDTH-94,230,24,(u8 *)" ",WHITE);//顯示字符串
LCD_Display_Str(LCD_WIDTH-94+96/2-strlen((char *)buff)*12,230,24,buff,RED);//顯示字符串
}
// printf("得分:%d\r\n",mark);
x0=112,y0=0;
Lcd_Drawshape(LCD_WIDTH-96+35,80,cnt2,WHITE,0);
cnt=cnt2;
cnt2=rand()%20;
if(cnt2==0)cnt2=1;
Lcd_Drawshape(LCD_WIDTH-96+35,80,cnt2,BLACK,0);
}
}
Delay_Ms(1);
i++;
}
}
審核編輯：湯梓紅
聲明：本文內容及配圖由入駐作者撰寫或者入駐合作網站授權轉載。文章觀點僅代表作者本人，不代表電子發燒友網立場。文章及其配圖僅供工程師學習之用，如有內容侵權或者其他違規問題，請聯系本站處理。
舉報投訴
-
STM32
+關注
關注
2283文章
10986瀏覽量
361150 -
游戲
+關注
關注
2文章
762瀏覽量
26583 -
開發板
+關注
關注
25文章
5381瀏覽量
100709
發布評論請先 登錄
相關推薦
帶AI的俄羅斯方塊
本帖最后由 shi_dongyu 于 2017-2-11 08:05 編輯
這周花了幾天時間研究了下俄羅斯方塊，并寫了一個帶AI的俄羅斯方塊游戲。我想這個游戲對每個人都很熟悉，很
發表于 02-10 20:08
采用單片機來實現的智能俄羅斯方塊游戲
俄羅斯方塊游戲算法請參考俄羅斯方塊游戲的算法1.概述俄羅斯方塊是一款風靡全球的益智游戲。它規則簡
發表于 11-19 08:26
OpenHarmony開發板運行俄羅斯方塊游戲
本案例展示在OpenHarmony開發板上運行俄羅斯方塊游戲, 通過12864液晶屏進行顯示. 項目底層通過OpenHarmony的HDF框架來驅動, 并基于linkboy圖形引擎編程框架完成
發表于 12-03 17:27
如何采用51單片機來實現的智能俄羅斯方塊游戲
俄羅斯方塊是一款風靡全球的益智游戲。它規則簡單，容易上手，且游戲過程變化無窮，使用戶在游戲中得到樂趣。本設計是采用51單片機來實現的智能
發表于 01-19 06:44
STM32F103ZET6開發板實現俄羅斯方塊小游戲
使用STM32F103ZET6開發板實現俄羅斯方塊小游戲。
發表于 12-19 15:27
?39次下載
使用STM32系列單片機設計的俄羅斯方塊游戲的程序免費下載
本文檔的主要內容詳細介紹的是使用STM32系列單片機設計的俄羅斯方塊游戲的程序免費下載?？梢允褂?b class='flag-5'>STM32F系列通過該例程程序通過TFT屏幕顯示俄羅
發表于 05-13 08:00
?25次下載
使用單片機制作萬用板俄羅斯方塊的資料合集免費下載
本文檔的主要內容詳細介紹的是使用單片機制作萬用板俄羅斯方塊的資料合集免費下載b包括了：程序，器件引腳等資料，PCB板版本俄羅斯方塊，PCB版
發表于 07-04 16:58
?39次下載
使用STM32開發板實現俄羅斯方塊游戲的工程文件和源代碼免費下載
本文檔的主要主要內容詳細介紹的是使用STM32單片機開發板實現俄羅斯方塊游戲的工程文件和源代碼免費下載
發表于 12-02 08:00
?21次下載
基于51單片機的俄羅斯方塊游戲
俄羅斯方塊游戲算法 請參考俄羅斯方塊游戲的算法1.概述俄羅斯方塊是一款風靡全球的益智游戲。它規
發表于 11-13 10:21
?58次下載
RT-Badge V2.0制作俄羅斯方塊小游戲
在看到 ART-Badge V2.0 支持了 2048 小游戲之后，萌生了制作一個 俄羅斯方塊的小游戲，畢竟是童年的經典。
FPGA實現的“俄羅斯方塊”游戲系統設計
本項目主要在FPGA上實現了一個經典小游戲“俄羅斯方塊”。本項目基本解決方案是，使用Xilinx Zynq系列開發板 ZedBoard 作為平臺，實現主控模塊，通過VGA接口來控制屏幕進行顯示。
發表于 03-28 10:41
?2246次閱讀
工商網監
評論